Popreel N1 Pod System

Description

The Uwell Popreel N1 Pod System is the first item in the Popreel line, and it combines design and practicality perfectly. With a 520mAh battery that can be charged by USB type-C (5v/1A), magnetic pod installation, Smart LED battery indication, and UWELL pro-FOCS Flavour testing technology built into the 1.2ohm pods, this device has a lot to offer.

When charging, the LED on the front of the Popreel Pod system will blink Red to show that the battery is below 30% charged, Blue to indicate that the battery is between 30% and 60% charged, and Green to indicate that the battery is completely charged.
Popreel N1pod has several safety features to ensure your safety at all times. Short Circuit Protection means the LED indicator will flash red three times and any output will be turned off if vaping is attempted. If the vape lasts longer than 8 seconds, the LED indicator will flash red 10 times and stop any output. If the vape lasts longer than 8 seconds, the LED indicator will flash green 5 times and stop any output.
The uwell popreel N1 Pod is a simple yet effective gadget. no complex settings or controls are required. simply fill your pod with juice, and let it sit for 5 minutes to ensure the coil is thoroughly saturated with E-Liquid, and then enjoy your flavour by simply inhaling through the mouthpiece.
The Popreel 1.2ohm Refillable pods are included in the kit and have a magnetic base and side filling as well as UWELL’s Pro-FOCS taste testing technology. They are also compatible with the NEAT 2 Refillable pods 0.8ohm.

Uwell Popreel N1 Pod Kit Features

• Size: 102.2×22.1×11.5mm
• Output: 10W
• 520mAh battery (internal)
• LED indication on the display
• The resistance range is unknown
• 2ml e-liquid capacity
• 1A charging rate through USB Type C
• Pods: 1.2ohm fixed coil refillable pods compatible with Yearn Neat 2 Pods
• Filling port on the side
• PCTG, PC+ABS material
• Magnetic Connection for Pods
• MicroUSB connector
• Material for PC Chassis
• Firing Mechanism with Draw-Activation

Popreel N1 Each set contain:

• 1 Pod System Popreel N1
• 1 Popreel N1 Pod Cartridge, 1.2 ohm
• 1 User Guide

How Do You Charge Popreel N1 Battery?

The charging current is set at 1A.

• Plug the tiny end of the provided USB type C cable into the mod’s USB port.
• Plug the cable’s big end into a compatible USB socket.
• When completely charged, the LED will cycle through the colours and turn green, remaining on.

Using a 1A mains plug, charging took about 40 minutes for me (41 and 42 mins each time to be exact.)

Filling the Uwell Popreel N1 Pod

Take the pod out of the mod. Remove the lid from the fill port and pour e-liquid into it.

Use the clear side of the pod to check the vape flavours level.Firmly close the fill port cover.
Allow 10-15 minutes for the e-liquid to soak into the coil if this is the first time filling the pod. This is known as priming, and it is a crucial stage. You risk burning the coil and your throat lining if it isn’t properly primed.